SPA400 Internet Telephony Gateway with 4 FXO Ports
Administration and Configuration Guide v1.0
SPA400 Internet Telephony Gateway with 4 FXO Ports – Administration and Configuration Guide v1.0
© 2006 Linksys
6
Click Save Settings at the bottom of the page and then the Restart button on the
SPA400 configuration utility. The SPA400 device will reboot. Continue to
Configuring the SPA9000 Voicemail Settings
.
Figure 3: SPA400 Configuration Utility,
Setup / Voicemail Server Page
Figure 4: SPA9000 Configuration Utility,
Voice / Line 1 Page
Configuring the SPA9000 Voicemail Settings
The parameters entered in the SPA400 Voicemail Server fields must also match in
the SPA9000 configuration utility under the associated Line # used for the SPA400
Voicemail Server.
The example in Figure 4 assumes the SPA9000 is configured to use Line 1. The
configuration and installation of the SPA400 and the integrated voicemail application
server can be configured on the same SPA9000 Line tab. It is not a requirement to
configure the SPA400 and Voicemail Server using separate SPA9000 Line tabs.
Three settings (URL) must be configured to enable the SPA9000 users to subscribe,
access, deposit, and manage their voicemail services. The settings are entered in
their respective fields on the SPA9000 in the following format:
<
service_id#>@<spa400_ip_address>:<port>
Where
service_id#
and
port
must match the setting entered in the SPA400
Voicemail Server menu defined in Figure 3.
(SPA400 IP Address)