© 2006 Cisco Systems, Inc. All Rights Reserved.
Linksys/Cisco Proprietary – All Content Subject To Change – Not a Warranty
56
Directed & Group Call Pick-Up Support
•
Directed Call Pick-Up
–
1. Determine which phone is ringing by
listening. This is the target phone.
–
2. Press the “Pickup” soft key or dial the
corresponding *code on your LVS 9000
phone.
–
3. Wait for your phone to prompt you to enter
the target phone number.
–
4. Enter either the extension number of the
target phone.
–
5. Your phone will then display a menu of
calls that are currently ringing on the target
phone.
–
6. Select the call to pickup from the menu.
–
7. Result: You are connected to the caller of
the selected incoming call; the target phone
will stop ringing.
–
By default the Directed Pickup * code is: 37
•
Group Call Pick-Up
–
To use Group Call Pickup, follow these steps:
–
1. Determine if any phone is ringing by
listening. It could be more than one.
–
2. Press the “GrPick” soft key or dial the
corresponding *code on your LVS 9000 phone
–
3. Wait for your phone to return a list of all the
LVS 9000 phones that are currently ringing.
Note that your phone will net be included in this
list.
–
4. Select the target LVS 9000 phone that you
want to pickup.
–
5. Wait for your phone to display a menu of
calls that are currently ringing on the target
phone.
–
6. Select the call to pickup from the menu.
–
7. Result: You are connected with the caller of
the selected call; the target phone will stop
ringing.
–
By default the Directed Pickup * code is: 36
