6
Setup Wizard
The first time you connect to the wireless access point, run the
Setup Wizard
to configure the
device.
1.
Click the
Quick Start
link on the main menu
Figure 2: Setup Wizard
2.
On the first screen, click Launch.
3.
Set the password on the
Device Password
screen, if desired.
4.
Configure the time zone, date and time for the device on
System Settings
screen.
Figure 3: Setup Wizard - System Settings
5.
On the
IPv4 Address
screen (Figure 6) configure the IP address of the device then click
Next. If you want to configure more than 4 SSIDs, please go to Configuration->Wireless
->Basic Settings. The access point supports up to 8 SSIDs per radio.