![background image](http://html.mh-extra.com/html/linksys/instant-wireless-wap54g/instant-wireless-wap54g_quick-installation-manual_1925212060.webp)
Wireless-G Access Point
1. Click the
Start
button, select
Settings
, and open the
Control Panel
. Inside
the Control Panel, double-click the
Network
icon.
2. When the
Network
window appears, click the
Protocols
tab. Then, click
the
Add
button.
3. Find the
TCP/IP protocol
in the
Select Network Protocol
field. Click it
once and then click the
OK
button.
4. When asked if you want to use DHCP, choose
No
.
5. If asked to supply your Windows NT CD, do so. NT will copy the neces-
sary files to your system. You may have to switch between the Access
Point’s Setup CD and the NT CD.
6. When TCP/IP appears in the
Network Protocols
window, click the
Bindings
tab. Windows will store your new bindings.
7. Click the
Protocols
tab. Then, select
TCP/IP
.
8. Click the
Properties
button. Select the type of network adapter you have
from the Adapters box and select
Specify an IP Address
.
9. Enter the computer’s IP Address and Subnet Mask. Check with your net-
work administrator for your settings.
10. Enter your Default Gateway if you have one.
11. When you finish, click the
OK
button. If NT asks about WINS, ignore it.
12. When the
Network
window reappears, click the
Close
button. Restart your
computer when prompted. TCP/IP has now been successfully installed.
1. Click the
Start
button, select
Settings
, and open the
Control Panel
. Inside
the Control Panel, double-click the
Network
icon.
37
Instant Wireless
®
Series
The following instructions are provided as examples for reference only. For
complete instructions on installing and troubleshooting TCP/IP and IPX, con-
sult your Windows operating system documentation.
1. Click the
Start
button, select
Settings
, and open the
Control Panel
. Inside
the Control Panel, double-click the
Network
icon.
2. If the
TCP/IP Protocol
is listed for your network adapter, go to step five.
Otherwise, click the
Add
button.
3. When the
Component Type
window appears, select
Protocol
and click the
Add
button.
4. Select
Microsoft
in the Manufacturers list and choose
TCP/IP
in the
Network Protocols list. Then, click the
OK
button.
5. When the Network window reappears, click
TCP/IP
. Then, click the
Properties
button.
6. Select
Specify an IP Address
.
7. Enter an IP Address for the computer, along with a Subnet Mask. Click the
OK
button. If you do not have these values, consult your network adminis-
trator.
8. When the Network window reappears, click the
OK
button. Restart your
machine. TCP/IP has now been successfully installed.
1. Click the
Start
button, select
Settings
, and open the
Control Panel
. Inside
the Control Panel, double-click the
Network
icon.
2. If the
TCP/IP Protocol
is listed for your network adapter, go to step four.
Otherwise, click the
Add
button.
3. When the
Component Type
window appears, select
Protocol
and click the
Add
button.
4. Select
Microsoft
in the Manufacturers list and choose
IPX/SPX protocol
in the Network Protocols list. Then, click the
OK
button.
36
TCP/IP Setup for Windows NT 4.0
Note: a Default Gateway is not required. Check with your network administrator.
IPX Setup for Windows NT 4.0
TCP/IP Setup for Windows 98 and Millennium
IPX Setup for Windows 98 and Millennium