Linksys EF1324 Скачать руководство пользователя страница 32

Страница: 32 / 68

EtherFast

Layer 3 Management 24-Port 10/100 + 2-Port Gigabit Ethernet Switch

Protocol Configuration

The Protocol Configuration screen is used to globally enable or disable uni-
cast or multicast routing protocols for the Switch.

• ARP - Address Resolution Protocol. Select Advanced for additional

configuration (see page 23).

• Proxy ARP - Enable or disable the Proxy Address Resolution Protocol.

• RIP - Enable or disable the Routing Information Protocol for unicast

routing. Select Advanced for additional configuration.

• OSPF - Enable or disable the Open Shortest Path First protocol. Select

Advanced for additional configuration.

• DHCP Relay - Enable or disable the Dynamic Host Configuration

Protocol relay. Select Advanced for additional configuration.

• IGMP Snooping - Enable or disable IGMP multicast filtering. Select

Advanced for additional configuration.

• DVMRP - Enable or disable the Distance-Vector Multicast Routing

Protocol.

Select Apply to make changes. Select OK to return to the previous panel.
Select Cancel to cancel any changes.

Instant EtherFast

Series

Add Subnet

The Add Subnet screen allows you to add an IP interface.

•

VLAN - The VLAN associated with this IP interface.

•

Select - Use this option to create or modify a VLAN.

•

IP Address - The IP address associated with the specified VLAN
interface.

•

Subnet Mask - A template that identifies the address bits in the
host address used for routing to specific subnets.

•

Proxy ARP - Enable or disable the Proxy Address Resolution
Protocol.

•

RIP - Enable or disable the Routing Information Protocol for
unicast routing.

•

OSPF - Enable or disable the Open Shortest Path First protocol.

•

DVMRP - Enable or disable the Distance-Vector Multicast Routing
Protocol.

Select OK to confirm the changes. Select Cancel to cancel any changes.

Содержание EF1324




































































Результаты поиска

Содержание EF1324

Отзывы:

Похожие инструкции для EF1324

Бренды по названию

Популярные бренды

Linksys EF1324, Руководство пользователя

Результаты поиска

Содержание EF1324

Отзывы:

Похожие инструкции для EF1324

Бренды по названию

Популярные бренды