15
Chapter 6: Configuring the Router
Instructions
EtherFast Cable/DSL Router with 8-Port Switch
PPPoE
If your ISP says that you are connecting through a PPPoE or you normally enter a user name and password to
access the Internet, perform these steps:
A
Select
PPPoE
as the Internet Connection Type, as shown in Figure 6-5.
B
Enter the User Name and Password.
C
Click the
Save Settings
button to save this change, or click the
Cancel Changes
button to undo your
change. For further help on this tab, click the
Help
button.
D
Click the
Status
tab, and then click the
Connect
button. When you are finished, proceed to step 4.
RAS
RAS (shown in Figure 6-6) is a service used in Singapore only. If you are using a RAS connection, check with your
ISP for the necessary setup information.
A
When finished making your changes on this tab, click the
Save Settings
button to save this change, or
click the
Cancel Changes
button to undo your change. For further help on this tab, click the
Help
button.
B
Click the
Status
tab, and then click the
Connect
button. When you are finished, proceed to step 4.
Figure 6-5: PPPoE for Basic Setup
Figure 6-6: RAS (for SingTel) for Basic Setup
