28/80
28/40
Ringing cycles count:
this option enable call repeating (or progressive call). In phone book is for
example filled first and second phone number and not create group. When come condition for first
number…
-
ringing time is out
-
phone number is busy
-
Subscriber is not reachable / registrated in network (then second number is dialed. When the
same conditions come true and ringing cycles are setup 2 the whole cycle is repeated one
more time).
Same key pressed again:
when you press again the same button then you setup door entry behavior:
-
Cancel Call
-
Redial
-
Ignore
DTMF dialing timeout:
this time concerns incoming calls from telephones and it decides for correct
code insertion. The principle is the same as previous parameter but it concerns codes from
telephone.
Camera light:
wide-angle camera has possibility of extra lighting when light conditions are not
acceptable. The lighting profiles s by white LEDs (unfortunately infra LED can’t be used but advantage
picture is fully in color). The door entry has dark sensor and you have following options of lighting:
-
OFF: LEDs will never light
-
during conversation: LEDs are always lighting during call independently on surrounding light
conditions
-
in the night: LEDs are lighting according surrounding light conditions independently on call
-
during night call: Led lights only during a call and the ambient lighting
Light intensity:
here you setup LEDs light intensity
Labels light:
name card might be backlighted by 3 ways:
-
Never: name cards will never be back lighted
-
at night: backlighting depends on surrounding light
-
Always: Name card is permanently back lighted
Light intensity:
here you setup backlight intensity
