10/80
10/40
3.3 Code lock
Authorize the opening of the portal by dialing a combination of the two keys. If the visitor presses
the buttons respecting the combination input and within the time specified on the time table, the
door phone will trigger the corresponding relay.
4. Parameters programming
4.1 After login
Before first start of
SLIM IP CAM V2
door entry firstly check positions of DIP switch. Each switch
should be in positions as shown in the picture below.
1 – On
2 – Off
3 – Off
4 – Off
Meaning of each switch:
1.
Always in
on
position. This switch is only used for production or service.
2.
When is
on
during power supply start (or reset), then the default IP address 192.168.1.250 is
configured; operative position is off, currently not used
3.
off, currently not used
4.2 Login
In your Web browser, type the IP address of the gateway IP Slim V2; the default address is
92.168.1.250. You can see the image of the camera as shown below – “home screen with video”
Default User name is «
admin
», password is «
1234
».
