8
B.
Hardware Installation
1. Connector Instruction
Remove the dome cover, and you will see the structure as below.
Connect power adaptor, then connect the IP camera to PC or network. Set
up the network configurations according to the network environment. About I/
O setting, please refer to chapter VII in User Manual: "
I/O Configuration
" for
detail.
The following picture shows a DC 12V connector for adapter jack plug.
2. Vandal Dome Installation Tips
In order to ensure IP66 waterproof level, please install the vandal dome
according to the instruction.
a. The Unused cable outlet hole must be closed, and the
waterproof connector on the used hole must be locked closely.