Linkcom Link Gate GSM ISDN страница 4 Скачать руководство пользователя

Страница: 4 / 22

Ce document est la propriété de Linkcom.

Toute reproduction même partielle est strictement interdite

classe

classement

LGISDNeng 6.5

numéro

002.02

date

09/11/04

page

4/22

Precaution for synchronization

Some PABX having several ISDN lines which are not able to ensure synchronization on the various lines
with a simple configuration.

The marks of PABX concerned known to date are: Alcatel, Ericsson and Siemens.

1.3 Link Gate Router

The gate is provided with ISDN input. The cable leading from this input must be connected to the former

ISDN line (exchange line). The other connector (output ISDN line) is used as a standard ISDN line
(connection to the exchange).

In this way, the user does not lose the former IDSN line. After proper LCR setting, the selected calls are
routed in GSM networks; the other calls pass further in the former ISDN line. The incoming calls are merged

from both directions in the ISDN output.

1.4 Optional modules

Some modules are now available for the GSM Link Gate ISDN:

a) OGM

module

Recording available with the software provide or through an ISDN phone.

10 seconds recording (see p 16)

SMS Server

Send and received SMS through POP mail software. (For more details see SMS server manual. (p 21)

c) Remote

configuration

Remote control of the Gateway, with a SIM card having data option.

1.5 Package content

ISDN 1

ISDN 2

1 gateway Link Gate ISDN 1

1 gateway Linkgate ISDN 2

1 magnetic antenna

2 magnetic antennas

1 SIM card holder

2 SIM card holders

1 power supply

1 installation CD

1 RS 232 cable

1 RJ 45 / RJ 45 cable for sy nchronization

1 T f or RJ 45

Содержание Link Gate GSM ISDN























Результаты поиска

Содержание Link Gate GSM ISDN

Отзывы:

Похожие инструкции для Link Gate GSM ISDN

Бренды по названию

Популярные бренды

Linkcom Link Gate GSM ISDN, Руководство пользователя

Результаты поиска

Содержание Link Gate GSM ISDN

Отзывы:

Похожие инструкции для Link Gate GSM ISDN

Бренды по названию

Популярные бренды