Link 904 – User Manual
7
3. OPERATION
3.1 DIALLING
To dial a new call first press [SPEAKER ON] and listen for
dial tone. Once you hear dial tone, dial the number either using
the keypad or by using one of the three memory buttons. Once
the other party answers, speak clearly in the direction of the
microphone at the front of the unit. To terminate the call press
the [SPEAKER ON] button again.
3.2 REDIAL
After pressing the [SPEAKER ON] button, by pressing the
[REDIAL] button you can dial the last number dialled on the unit.
3.3 PAUSE
Pressing the [PAUSE] button either during a dialling
sequence or when programming one of the memory buttons will
insert a 3 second pause.
3.4 SPEED DIALLING
When you are on line, pressing one of the memory
buttons [M1], [M2], [M3] or [M4] will dial the number stored in
that memory location.
3.5 RECALL
The [RECALL] button can be used to access additional PBX
or network operator services. The telephone supports both Earth
and TBR recall (See section 2.4).
3.6 VOLUME CONTROL
While the telephone is on line, the receive volume control
can be adjusted by pressing the [+] and [-] volume buttons. The
volume level will be remembered by the unit for the next call after
the telephone goes off line.
3.7 MUTE
If you wish to put the phone call on hold for a while or
pick up the call on another telephone connected in parallel, this
can be done by using the [HOLD] button.
Once the [HOLD] button is pressed the call is placed on
hold and the hold indicator is turned on. To resume the call, press
the [SPEAKER ON] button and resume conversation.
Alternatively, pick up another telephone connected in
parallel with the Link 904 and the hold indicator will be turned Off.
Содержание Link 904
Страница 1: ...LINK 904 User guide for Link 904...
