2. Plug the HDMI end of the HDMI-to-DVI cable into the
LM-WIH1
HDMI output, and the DVI end to
the DVI input on the TV/monitor.
3. Connect the 3.5mm plug end of the audio cable to the 3.5mm stereo audio jack on the
LM-WIH1
,
and connect the other end of the audio cable to the RCA connectors on the TV/monitor or stereo
equipment. Usually, there are red and white RCA connectors that need to be connected.
4. Turn on the TV/monitor; switch the video input of the TV to match the DVI input
connector used by the
LM-WIH1
. Then you should be able to see the Wii screen after you turn on
the Wii console.
Note I:
In order to obtain the best display quality, we strongly recommend that you set
the Wii video output to 480p mode (progressive mode). For more details, please refer to the “Set the
Wii Video Output to 480p Mode” section.
Note II:
If the audio input connector on your TV/monitor or stereo equipment is a 3.5mm audio jack
rather than RCA connectors, then you will need to have a 3.5mm to 3.5mm male-to-male stereo
audio cable instead.