LINK-MI LM-W150, Руководство пользователя

Страница: 18 / 28

Searching.....
14
4. Operation instruction
Getting start
f) When Tx is connected to video source, the “VIDEO” indicator will always light on. Before
the Tx and Rx wireless connection is established, the Tx and Rx's LINK indicator light
(green)will not light on. Only when the wireless connection is established and Rx detects
with normal video signal from Tx through wireless communication, then the “LINK”, “RSSI”
and “VIDEO”
（
yellow
）
indicator will light up. Before Rx outputs normal video signal, HD
monitor will show “Searching...” as the below picture showed;
g) The system will spend 20-30 seconds on constructing communication link, and the real
link period depending on the local condition. When wireless link is set up, “LINK” and “
VIDEO” indicator will light on and “RSSI” indicator shows the current received wireless
signal strength. When “VIDEO” indicator lighting shows receiving the normal video signal,
and then connected HD monitor will display the video and audio accordingly;
h) After Tx and Rx are connected normally, if the video outputs correctly from the PC, DVD
or camera, then Tx and Rx's “VIDEO”(yellow), “LINK”(green) and “RSSI”(Blue) indicators
will light on; if disconnected, then Tx and Rx's “VIDEO”(yellow), “LINK”(green) and “RSSI”
(Blue) indicators will not light on.
Note: RSSI is the strength of signal reception.