LINK-MI LM-W150, Руководство пользователя

Страница: 17 / 28

13
4. Operation instruction
Getting start
After finishing all steps above, system is workable, follow the below steps.
a) Ensure the video source output of the camera is OK, and the HD monitor is power on
and switched to the connected video input channel;
b) Ensure all input, output HDMI cables are connected;
c) Ensure all antennas are installed, and the straight line distance is 3-5m between
transmitter and receiver, it is better to keep the antennas of Tx and Rx face to face for
best RF performance. see the below figure;
d) Ensure both the transmitter and receiver is installed batteries or DC input ports are
connected well.If connecting to outside 12V DC power sources, please make sure the
DC power correctly connected to the transmitter and receiver. Then toggle power switch
of transmitter and receiver to 'ON' respectively, then 'Power' indicator will light on. then
the receiver 7-seg LED frequency channel indicator will display the corresponding
frequency point showing that the power working normally;
e) Ensure the transmitter and receiver are set to the same frequency channel;
Note: this product support two different working mode, fixed frequency mode and
DFS mode, fixed frequency mode is 0-9; DFS mode is “A”. please choose “A” for the DFS
mode.
Transmitter Receiver