LINK-MI LM-DT200, Руководство пользователя

Страница: 3 / 6

RESET KEY
Hold down the key for 8 seconds after
power on, the model will restore default
settings
2.2 Indicator led.
Indicator led Status
FX
Light On The transmission rate is correct
Light Off The transmission rate is not correct
Link act
Light On Fiber Link up
Flash
Packets of data are transmitting in the
indicating port
Dpx
Light On In the State of full-duplex
Light Off In the State of half-duplex
3.0 Function Specification
1) HDMI 1.3/HDCP1.1 & 1.2
2) Both Optic-fiber transmission and Ethernet Transmission
3) Support point-to-point mode, one point-to-many mode and cascaded transmission
mode.
4) built-in IR remote control function, you can control the set-top box at the receiving
site using the IR remote control.
5) Pure hardware design, just plug and play, no need to install extra software.
Video Parameter