LL-RLP-20 Datasheet
www.link-labs.com
Information contained in this document is subject to change without notification
13
ETSI COMPLIANCE INFORMATION
The use of radio frequencies is limited by national regulations. The radio module has been
designed to comply with the European Union’s R&TTE (Radio & Telecommunications Terminal
Equipment) directive 1999/5/EC and can be used free of charge within the European Union.
Nevertheless, restrictions in terms of maximum allowed RF power or duty cycle may apply.
The radio module has been designed to be embedded in
to other products (referred as “final
products”). According to the R&TTE directive, the declaration of compliance with essential
requirements of the R&TTE directive is within the responsibility of the manufacturer of the final
product. A declaration of conformity for the radio module is available from Link Labs, LLC on
request.
The applicable regulation requirements are subject to change. Link Labs does not take any
responsibility for the correctness and accuracy of the aforementioned information. National laws
and regulations, as well as their interpretation can vary with the country. In case of uncertainty,
it is recommended to contact either Link Labs
’ accredited Test Center or to consult the local
authorities of the relevant countries.
