AirFinder Quick Start Guide
7
iv.
Locate power outlet that already has installed a functioning Power Cradle AC
Power or a Location Beach AC Power.
v.
Slide attaching pegs of Access Point into slots of Power Cradle AC Power or a
Location Beach AC Power.
vi.
See Figures 15 and 16 for verification of proper installation of Access Point.
vii.
Verify proper functioning of Access Point by observing proper LED behavior of
unit according to the Power and Reset Conditions described below in b.
viii.
After verification of the proper functioning of Access Point, then the Access
Point has been properly installed.
Figure 3: Front view of AP attached to Power
Cradle and wall transformer
Figure 4: Side view of
Access Point attached to
Power Cradle AC Power