Door Operator / STA / LC- 2973 Rev.H– 5
5. Installation
Mounting torque support bracket to Operator
1. Remove Plastic caps (if fitted) from hollow shaft of the
operator.
2. Fix torque plate using the 4-off M8x20 bolts, 4-off M8
spring washers and 4-off M8 flat washers.
Information:
Link Controls Ltd. constantly strives to
improve the quality of its goods and as
such reserves the right to replace/modify
products without prior notification. Any
examples given are inteded for guidance
only.
5.3 CDO100 Compact Operator - Flange Mount
Handing the operator
This operator is suitable for left or right hand installation.
The flange and shaft can be removed and fitted on the
opposite side.
Assembley of the operator
1. Remove the plastic caps
(if fitted from hollow shaft of the operator)
Torque Plate is
height adjustable
As viewed from
End Elevation
‘1A’
‘1B’
1
1
2
