Linhai UTV 1100D 4x4 EPS OWNER’S/OPERATOR’S MANUAL Europe
56
JUMP-STARTING THE ENGINE
Jump-starting the vehicle should be avoided. The battery should be removed and charged
instead. However, if the vehicle must be jumpstarted, proceed as follows.
1. Turn the key to “STOP” position.
2. Using a charged 12 V battery, connect the positive (+) lead of the jumper cable to the
positive terminal of the battery in the vehicle and the other end of the positive lead to the
positive terminal of the charged battery.
1. Jumper cable positive lead 2. Jumper cable negative lead
3. Connect the negative (-) lead of the jumper cable to the negative terminal of the charged
battery and the other end of the negative lead to an unpainted metal surface of the vehicle.
4. Start the engine.
5. After the engine starts, disconnect the negative (-) lead of the jumper cable from the
vehicle and charged battery, and then disconnect the positive (+) lead of the jumper cable
from the charged battery and the battery in the vehicle.
Close the bonnet.
CAUTION
If the bonnet latches are not hooked properly, or if the locks do not work properly, the
hood may open while driving, which can cause serious injury.
Note:
This machine is equipped with electric starting. If the battery is not charged sufficiently, engine
Содержание UTV 1100D 4x4 EPS
Страница 11: ...Linhai UTV 1100D 4x4 EPS OWNER S OPERATOR S MANUAL Europe 11 2 3 4 5 6 7...
Страница 12: ...Linhai UTV 1100D 4x4 EPS OWNER S OPERATOR S MANUAL Europe 12 8 9 10 11...
Страница 13: ...Linhai UTV 1100D 4x4 EPS OWNER S OPERATOR S MANUAL Europe 13 12 13 14...
Страница 104: ...Linhai UTV 1100D 4x4 EPS OWNER S OPERATOR S MANUAL Europe 104...