_________________________________________________
_________________________________________________________________
5
TOM Child Bed
August 1999, 1
st
Edition
Back
Trendelenburg's
position
Height
Anti-Trendelenburg's
position
Positioning is done mechanically - using an appropriate lever.
(see. the Positioning section)
Variants of the model
Model
Colour tint
3 … RAL 1015 white coffee
4 … RAL 7035 grey
2 …TOM 115
B … RAL 9002 light grey
V
a
ri
a
n
ts
3 …TOM 140
C … RAL 9010 white
Model Number …
1 3 3 1 x
0 0 1 x
0 2 A 0
Delivery
The child bed is usually delivered fully assembled, or expert staff assembles the bed
on site. The completeness should be checked against delivery documents. Any
insufficiencies or defects must be immediately communicated to the forwarding agent
and supplier and must be recorded in the delivery certificate.
Safety Instructions
It is necessary to read through and observe the safety instructions prior to using the
child bed.
It is necessary to read through and observe the safety instructions prior to
using the child bed.
The child bed may only be used on flat and solid floors.
When setting various positions, make sure that the no persons, body parts or other
objects are located in the positioning area.
Do not put the side grid under a load grater than 25 kg vertically and 25 kg
horizontally.
Prevent the child from excessive leaning on the side grid with its upper body.
The child bed may be used up to a maximum weight of 75 kg of the child.
If the bed level is in the highest position, there is a danger of pinching the
fingers when lowering the side grid.
The lock must be open when lowering
the side grid !
Lock open
