
D9U001L20-0101_04
45
15.2 IV Poles
WARNING!
Risk of injury due to use of unsuitable accessories!
►
Use infusion stands exclusively for accessories listed in the instructions for use.
►
Only mount an infusion pump to the lower (wider) telescopic section of an infusion stand above the head board /
foot board.
►
Never mount an infusion pump to the upper (thiner) telescopic section of an infusion stand.
►
Ensure the infusion pump will not collide with any movable parts of the bed (especially Backrest part) or with the
patient. This must be verified during installation.
►
Do not use the infusion stand as driving/pushing device during the bed transport.
You can insert IV poles into the sleeve fittings at the head of the bed.
►
Use only IV poles with four hooks for hanging IV bags or for hanging a basket for intravenous solutions.
►
Ensure that the weight-bearing capacity of the IV pole and the four hooks is not exceeded.
Fig. IV Pole
Fig. Holder for Active Mattress Compressor
The holder for the active mattress compressor is only suitable for plastic head board and foot board.
►
Suspend the holder for the anti-decubitus mattress compressor from the foot board.
15.3 Holder for Active Mattress Compressor