LINET Eleganza 3 Скачать руководство пользователя страница 49

Страница: 49 / 52

D9U001GZ5-0101_03

12.2 Safety Checks

Warning

Incorrect safety checks can cause injuries!



Ensure that safety checks are performed by customer service or authorised
personnel (certified by the manufacturer) only.



Ensure that the safety checks are recorded in the service and maintenance log.

A defective bed can cause injuries!



Have a defective bed repaired immediately.



If the defect cannot be repaired, do not continue to use the bed.

Warning

In accordance

with §6 of the Medical Devices Operator Ordinance, the operator is required to perform a technical

safety check on the hospital bed every 12 months.

The procedure for performing the safety check is stipulated in IEC 60601-1-2005.

The manufacturer will give a certificate to service organisations in which the manufacturer declares that the

service organisation is qualified to perform maintenance on LINET

products.

LINET

makes every reasonable effort within research, design and manufacturing of beds to ensure that their

products are fit for purpose and produced to the highest level of quality. However LINET

can take no responsibility

for any damage caused to the product or harm to patients, staff or other individuals as a result of:



Not following the instructions for use, including warning and caution statements, provided in their user
manuals,



Use of the product for other than its intended purpose as stated in any documentation provided by LINET

NOTE

On request, the manufacturer will provide circuit diagrams, component part lists, descriptions, calibration

instructions etc. for service personnel for the repair of ME equipment designated by the manufacturer as repairably
by service personnel.

Содержание Eleganza 3





















































Результаты поиска

Содержание Eleganza 3

Отзывы:

LINET Eleganza 3, Руководство пользователя и техническое описание, Страница: 49 / 52

Результаты поиска

Содержание Eleganza 3

Отзывы: