10-14
line rg o @line rg o .lv
+371 29114991
www.line rg o .lv
c o m fo rt & e rg o n o m ic s
lin
e rg o
1.1.3
Simple memory
This handset has an editable memory for high and low (stand and sit) position. It could
also be used to avoid collision with i.e. a cabinet or pedestal. When a memory position is
set the desk will stop when the memory position is reached. To drive the desk outside the
memory position press the up or down button for a minimum of 5 seconds.
How to set memory/end positions:
1.
Drive your desk to the level you want to store.
2.
Press both buttons 3 times (0,5-1 second between each pressing).
3.
Then press ”up” or ”down” to set the position (0,5-1 second).
4.
Do the same procedure for your second store.
To clear memory positions perform a reset as described in section 1.2.
Set ”Upper limit”
Set ”Lower limit”
Above
”Upper limit”
>5 sec
>5 sec
Below
”Lower limit”
CAUTION
Setting lower simple memory will replace the preset safety stop at 10 mm. To
restore preform a reset.
