-25-
5.2 Registration of the send frames
Register transmission test frames before starting simulation.
<CAN/CAN FD>
From top menu, touch “Interface/
Function”. Select “Simulation”
for ”Operation mode”, and “Ch1”
or “Ch2” for “Simulation Ch”.
Touch “Simulation settings” on
the bottom of screen and register
transmission tables.
It is able to register 16
transmission tables (No.
~
F).
Touch the table No. to register
data on that table.
■Frame type
For CAN, select from “Data
(Standard)”, “Data (Extended)”,
“ R e m o t e (S t a n d a r d )”, o r
“Remote (Extended)”.
For CAN FD, select from “FD
(Standard)” or “FD (Extended)”.
Chapter 5 Simulation Function
5.1 Simulation Function
Simulation function is the tool that makes the analyzer operating as a
communication partner with a teste device, and that executes a test for
transmission and reception. Even if communicated devices are not prepared
at the first step in developing, the testing like real operation will be able to be
executed. It is able to transmit test frames of CAN/ CAN FD and LIN.