-49-
Chapter 10 After Support and Maintenance
10.1 How to make it back to default state
By the software reset, you can clear the internal setting of line monitor and
make it back to the default state of shipment.
■
Software reset control
While the power is off, turn on the power pressing [ENTER]+[TOP/DEL].
“Initialized!!” message is displayed on the opening screen.
When there is any problem in the behavior of line monitor, this operation may
solve it.
Please note that by this operation measured data in the buffer memory is also
all cleaned.
10.2 Warranty and After service
Warranty
■
When you face any problems, please contact LINEEYE
distributors or LINEEYE
■
Warranty
Within a period of 12 months from the date of shipment, LINEEYE
warrants that your purchased products (except consumable parts such as
the battery and software) are free of charge from any defects in material
and workmanship, only when the products are operated in accordance
with procedures described in the documents supplied by LINEEYE.
If the defects exist during the Warranty period, please send back the
products to LINEEYE distributors or LINEEYE. LINEEYE will repair
or exchange them at no charge. In this case , the shipping charge will be
at your own expense. The foregoing warranties are the sole warranties
given by LINEEYE. Above warranties shall not be applied to the products
that have been modified, repaired or altered (except by LINEEYE)
or that have been subjected to unusual physical or electrical stress,
misuses, abuse, negligence or accidents. LINEEYE disclaims all other
warranties including the warranties of merchantability fitness for some
particular purpose and noninfringement of third party right. LINEEYE
cannot promise that the software is error-free or will operate without any
interruption.
