LineEye LE-650H2, Инструкция по установке и эксплуатации, Страница: 23 / 44

21
3. Temporary folder
Set a temporary folder to temporarily save log data.
Select "Options"-> "Temporary Folder" from "Log" in the menu.
Use of a prearranged
temporary folder
in windows as the
temporary folder
Use the Windows default temporary folder as the temporary folder.
Designate a
temporary folder
（
*3
）
(When the "Use of a prearranged temporary folder in windows as the
temporary folder" check box is OFF)
Specify a temporary folder. Do not specify a non-existent folder or a network-
connected folder.
We recommend that as a temporary folder you specify a folder on the same
drive as the drive where you want to save the log data .
Select a folder
(When the "Use of a prearranged temporary folder in windows as the
temporary folder" check box is OFF)
Open a folder browser to select a temporary folder. Do not select CD, DVD
drives or folders on the network.
Display a warning
If the free space of the temporary folder falls below the set value during log
operation, a warning dialog appears but the logging operation continues as it is.
When the free space is completely exhausted, the log operation will stop
automatically
(* 1)
.
Stop data logging If the free space of the temporary folder falls below the set value during log
operation, log operation stopps immediately
(* 1) (* 2)
.
Assign the
freecapacity
Set the limit value of the free space for "Display a warning" / "Stop data
logging" in MByte units.
*1
：
There can be a slight lag before the warning is actually displayed or the log operation stops.
*2
：
Normally, use the setting with "Stop data logging". If the free space of the temporary folder becomes extremely small (several
Mbytes or less), it may not be able to execute processing such as displaying, searching, and saving logs.
* 3: The specification of the temporary folder is applied to "the newly opened log window after the temporary folder is specified".
If the log is acquired for an already open log window, the temporary setting of when the log window is opened is used.