Linear DXS-80 Скачать руководство пользователя страница 27

  

SECTION 

LINEAR LLC 

FCC ID:  EF4 SST00116

 

REPORT OF MEASUREMENTS

 

 

 
LINEAR LLC 
FCC ID: EF4 SST00116 
Model:  DXS-80 Carbon Monoxide Alarm Transmitter 
 
The enclosed documents reflect the requirements contained generally within the code of 
Federal Regulations, Title 47, Parts 2 and 15 as most recently published October 1, 
2006 and all other applicable revisions made by the Commission since that time. 
 
The specific rule sections for which the enclosed documents demonstrate compliance or 
rely upon to demonstrate compliance with the Commission's application and technical 
standards are as follows: 
 
 

15.201-15.207, 15.231, Subpart C, Intentional Radiators. 

 
Test Procedure C63.4-2004, Section 13, Measurement of Intentional Radiators was 
used for the testing of this device. 
 
In accord with Section 2.948 of the Commission's Rules, a Test Site submittal is on file 
with the Commission and a Letter of Acceptance dated March 17, 2006 (Registration 
Number 90767) is a portion of the Commission's records. 
 
A test site submittal is on file with Industry Canada.  The Industry Canada file number is 
1078.  Dated April, 2006. 
 
All of the information contained within this documentation is true, correct, and complete 
to the best of my knowledge. 
 
 
 

____________________________ 

 

 

_ July 16, 2007 _ 

John 

W. 

Kuivinen, 

P.E. 

     Date 

Regulatory Compliance Engineer 

Содержание DXS-80












































Отзывы: