Linear 6-12 SECTION Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 28

Linear 6-12 SECTION Скачать руководство пользователя страница 2

BIASI B/40

PAGE 2

Dear Customer:

Thank you for buying a Linear commercial boiler.

The Linear is a cast iron, oil or gas fired hot water boiler, using the famous 3-pass design. The
boiler is simple, rugged and engineered for maximum heating efficiency.

We  realize  that  it  is  not possible  to  answer  all  questions  about  the  Linear  series  boiler  in  this
manual.  Reading  this  installation  manual  does  not  make  the  reader  an  expert  in  all  aspects  of
installation  and  operation,  and  does  not  replace  the  need  for  a  qualified,  licensed  heating
contractor. We urge you to contact your installing contractor or distributor if you are in question
about any aspect of your boiler's performance. Our main concern is that you are satisfied with
your  boiler  and  its  performance.    We  require  that  your  contractor  complete  efficiency  tests
using instruments.

The controls and accessories listed in this manual are intended to serve as guidelines rather than
specific  recommendations.  We  realize  that  other  makes  and  models  of  such  devices  are
available and can be used as successfully  as those we specify. The installing contractor is the
best judge of a system's specific requirements, as well as the local availability of certain makes
and  models  of  controls  and  accessories.  The  preceding  does  not  apply,  however,  to  the
equipment  that  comes  with  every  boiler,  such  as  the  overheat  control  (L4006E)  and  pressure
relief valve.

The installation of the specific devices supplied with every boiler is absolutely

necessary to the safe operation of the boiler and protection of the heating system.

This Linear boiler has a limited warranty, a copy of which is provided with the boiler. Please
be sure to return the warranty registration card as the warranty will be void without your boiler's
serial numbers, date of installation and the name of your installer being on record in our files.

Thank you for purchasing our B-40 Linear series boiler. If you have questions or comments,
please don't hesitate to contact us immediately. Our goal is 100% customer satisfaction.

«
1
2
3
4
...
»

Содержание 6-12 SECTION





























Отзывы:

Нет отзывов