Quick Start
Remove amplifier, power supply, and included cables from the
box.
Attach the AC umbilical cable to the power supply and amplifier.
Be sure to tighten the cable’s locking connectors.
Hook up your sources and speakers and/or headphones.
Once your system is set up and everything is hooked up, turn on
the power supply and then turn on your Z10e via the power button
on the front panel.
There is a turn-on delay of several seconds to allow the unit to
warm up.
Operation
The unit is designed to be powered on indefinitely without harm.
The front panel power button powers down the amplifier but the
power supply remains on in a nearly idle state. To turn the amp
completely off, use the power switch next to the IEC connector.
The unit is air cooled and should be placed somewhere with
adequate ventilation.
