3
dc1642af
DEMO MANUAL DC1642A
Figure 2. Entering the Correct Device Information for Your ADC. Select the Correct Parameters for the DC1642A. Under
Normal Conditions, PScope Should Automatically Recognize the Board and Adjust the Software Settings Accordingly
Other Board Circuitry
Device U1 is an EEPROM device that is used by the PScope
software to identify the board and apply the correct set-
tings for the data collection.
Using PScope Software
PScope, downloadable from Linear Technology’s website
at
http://www.linear.com/software
, processes data from the
DC890 QuikEval II data acquisition board and displays FFT
and signal analysis information on the computer screen.
The on-board EEPROM U1 should enable automatic board
detection and auto-configuration of the software.
From the Configure menu in the toolbar, uncheck “Au-
todetect Device.” The default settings for DC1642A are
shown in Figure 2.
quick start proceDure
Downloaded from
Downloaded from
Downloaded from
