5
dc1508bf
DEMO MANUAL DC1508B
QUick start proceDUre
7. LTpowerPlay is ready to program/verify the device.
a. Click the Program and Verify button, and wait for the
process to complete.
b. After the process is complete, you will see Successfully
Programmed and Verified Device in the status bar at
the bottom.
8. Prior to removing the device and programming another,
power must be removed from the device. Set the power
switch S1 to the OFF position. Open the socket lid.
Remove the device with tweezers or a vacuum tool.
The USB ribbon cable may remain connected to the
programming board.
9. To program another device, repeat Steps 3 through 5,
then Steps 7 and 8. LTpowerPlay’s Programming Utility
does not need to be closed.
