5
• This product must be installed by a qualified professional.
•
Always operate the equipment as described in the user manual.
•
A minimum distance of 0.5m must be maintained between the equipment and combustible
surface.
•
The product must always be placed in a well ventilated area.
•
Always make sure that the equipment is installed securely.
•
Do not stand close to the equipment and stare directly into the LED light source.
•
Always disconnect the power supply before attempting and maintenance.
•
Always make sure that the supporting structure is solid and can support the combined
weight of the products.
•
The earth wire must always be connected to the ground.
•
Do not touch the power cables if your hands are wat.
Attention
•
This product left the place of manufacture in perfect condition. In order to maintain this
conditions and for safe operation, the user must always follow the instructions and safety
warnings described in this user manual.
•
Avoid shaking or strong impacts to any part of the equipment.
•
Make sure that all parts of the equipment are kept clean and free of dust.
•
Always make sure that the power connections are connected correct and secure.
•
If there is any malfunction of the equipment, contact LINEARLED immediately.
•
When transferring the product, it is advisable to use the original packaging in which the
product left the factory.
•
Shields, lenses or ultraviolet screens shall be changed if they have become damaged to
such an extent that their effectiveness is impaired.
•
The lamp (LED shall be changed if it has become damaged or thermally deformed)
g. Important
2. INSTALLATION
Always read the user manual before operation. Please confirm that the power supply
stated on the product is the same as the main power supply in your area.
a. Mounting
Hanging
The fixture can be mounted in a hanging position using the supporting bracket. The bracket
should be secured to the mounting truss or structure using a standard mounting clamp.
Please note that when hanging the unit a safety cable should also be used.
Upright
The fixture can be mounted in an upright or sitting position using the supporting brackets.
Note :
The fixture can be mounted at any angle and in any position. It is possible to further
adjust the angle of the fixture using the two adjustment knobs located on the side.
