Linear Acoustic UMPAX v4, Руководство пользователя

Страница: 16 / 39

Linear Acoustic UPMAX v4 User Guide Connections and Quick Setup
9
Chapter 2: Connections and Quick Setup
This chapter covers all required connections for the UPMAX v4.
2.1 Unpacking and Inspection
Before unpacking the unit, inspect the outer carton for shipping damage. If the carton
shows damage, inspect the unit in those areas. Please save the carefully designed shipping
carton and packing materials. In the unlikely event that the unit needs to be returned to the
factory, alternate cartons or packing materials may not be adequate and can cause damage
not covered by warranty.
The following essential items are provided with the unit:
• Bag containing:
• Quick-start sheet to get you up and running
• Two IEC power cords (style matches country of order);
• USB stick with this manual
• Spare fuses and a handy black pen.
• Warranty information: Please fill out and return the warranty card to Linear Acoustic
to ensure your software and documentation are kept up to date.
2.2 Installation
UPMAX v4 installation requires:
• One standard rack space unit with ADEQUATE VENTILATION (the unit relies on
convection cooling from side-panel vents);
• standard 75-Ohm BNC cables for digital signal connections;
To connect to digital equipment with 110-Ohm XLR connectors, use impedance-
matching transformers (available from Canare, Neutrik and other manufacturers).
• Proper reference. The unit will default to internal 48kHz with no signals applied, but
AES 1/2 or SDI can be used as the reference. For proper plant timing, proper refer-
ence selection in imperative. Note that if SDI embedding is active, clock source will
automatically be forced to SDI.