Figure 3-5
Clock Source Status
NOTE:
+96E@ADE2EFDD4C66?H:==:?5:42E6M%@)67N:7E9649@D6?
C676C6?46:D?@E56E64E65 7 ?E6C?2=<K:D49@D6?E96DE2EFD
D4C66?H:==:?5:42E65M ?E)67NE@:?5:42E6E92EH9:=6G2=:57@C2?2=@8
@?=J@A6C2E:@?E96F?:E:D?@EDJ?49C@?:K65E@2?JC676C6?46
3.5.10 Proc In 1/2 Src
Determines which source provides audio for the loudness processing engine. Turning
the menu knob scrolls through the following choices.
?
SDI In (1/2, 3/4, 5/6, 7/8, 9/10, 11/12, 13/14, 15/16): Uses the selected SDI
audio pair.
?
Analog XLR In: Uses the analog audio inputs.
?
AES In 1/2: Used the AES inputs.
3.5.11 SDI Embed Audio
Selects whether to enable audio re-embedding or pass the SDI signal through the
AERO.lite untouched. Note this does not affect de-embedding, which is active at all
times.
3.5.12 SDI Out
Selects the source for re-embedding into an applied SDI signal. Choices are the
processed output (1/2), the input of any SDI pair, the AES inputs (1/2), the analog XLR
inputs (1/2), or Muted. Turning the menu knob scrolls through these choices.
3.5.13 Integration Time (ITU Meter Option)
Adjusts the length or storage time of the integrator for the loudness meter. Faster
settings (shorter times) will produce more quickly-moving readings and may result in less
accurate average loudness readings. Choices are 3 seconds, 10 seconds, 30 seconds,
and Infinite. The default setting is 10 seconds. Turning the menu knob scrolls through
available settings.
The ITU Meter Option is discussed in more detail at the end of this chapter.
#:?62C4@FDE:4)& =:E66E2:=65&A6C2E:@?2?5$6?FD
