1. LCD display and Function
When the sensor is in open circuit,
OPN FAULT displays on the LCD.
When the sensor is in short circuit,
CLS FAULT displays on the LCD.
2. Function of control panel
1) Temperature control knob
Protecting function of temp sensor's open circuit and shot circuit
Note: No matter what problems happened, the machine will cut off the
heating power supply automatically, and the motor will stop running.
FUNCTIONS OF LCD DISPLAY
AND CONTROL
P
ANEL
-
4.2
155
FAU
LT
4.2
1
-
INSTALLATION
1.Upon receipt of the laminator, inspect of box, the machine and all other
contents of the box for shipping damage. Shipping damage should be brought
to the immediate attention of the delivering carrier.
2.The laminator comes fully assembled on a stand .
3.Screw the wheel on the stand, put the stand upright. Place the tie bar
horizontally, connect the bar and stand with the bolt which has spring washer
on it, then fasten it.
4.Put the laminator on the assembled stand.
5.Start operation after turning the wheel stop switch to "OFF".
4
