USER AND MAINTENANCE MANUAL
User manual version 11/2009
18
ROOM TEMPERATURE SETTING
To set the room temperature, simply press P4 to enter the temperature setting menu and then
P1 or P2 to increase or decrease the value. The display shows the current SET temperature;
press P3 to exit the menu.
figure
FLAME LEVEL SETTING
Press P5, and then press P1 or P2 to increase or decrease by stove heat output and
automatically set all of the corresponding parameters. The display shows the selected heat
output. If the room temperature measured by the probe exceeds the temperature set on the
display, the control unit automatically reduces heat output to the minimum (level 1).
PROGRAMMING
OPERATING MODE MENU
This function is used to select the stove operating mode.
MANUAL
Continuous operation of the stove. The signal to ignite/shut off the flame is
sent manually using the ON/OFF button.
