32
DO935DVK
EN
PARTS
1. Handle
2. LED light
3. Storage basket
4. Temperature control knob
5. Drainage opening
6. Wheels to move the appliance
BEFORE THE FIRST USE
INSTALLATION
· Remove the exterior and interior packing, wipe the outside thoroughly with a soft dry cloth
and the inside with a wet, lukewarm cloth. Avoid placing the cabinet in a narrow recess
or near any leave source, direct sunlight, or moisture. Let air circulate freely around the
cabinet.
· Select a place with a strong, level floor.
· Allow 10 cm of space between the back of the freezer and any adjacent wall.
· Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources
nearby will cause higher electricity consumption.
· Avoid very moist places. Too much moisture in the air will cause frost to from very quickly
on the evaporator, and your freezer.
· Before connecting your freezer to the power supply, check that the voltage stated on the
rating label of your appliance corresponds to the voltage in your home. A different voltage
could damage the appliance.
· The appliance must be grounded. The manufacturer is not responsible for damages that
may occur as a result of usage without grounding.
· For uneven surfaces, front feet can be aligned.
· After installation, leave the freezer for 3 hours before turning it on. This way the refrigerant
can settle.
· Allow the appliance to run empty for 24 hours so the compartment can cool to the
appropriate temperature.
· This appliance is designed to operate in ambient temperature between 16°C and 38°C.
If these temperatures are exceeded, i.e. colder or warmer, the appliance will not operate
correctly.
· The appliance may only be used indoors.
· The freezer makes noise when the compressor pumps the coolant. This is normal.
1
2
3
4
5
6
Содержание DOMO DO935DVK
Страница 63: ...63 DO935DVK www domo elektro be SK ...