52
DO362A
EN
30cm
30cm
50cm
control panel
handle
(both sides)
horizontal louver
blade
(swing automatically)
Caster
Panel
remote signal
receptor
power plug socket
power cord buckle
bottom tray
drain outlet
power cord outlet
drain outlet
(only for pump
heating mode)
upper air filter
(behind the grille)
upper air intake
air outlet
lower air filter
lower air intake
drain outlet
rear
front
3. FAN touch
With this touch you can select the fan speed. The related indication light will turn on.
There are four settings:
·
50cm
or
max 120cm
min 30cm
low
·
50cm
or
max 120cm
min 30cm
medium
·
50cm
or
max 120cm
min 30cm
high
· auto The indicator light will not illuminate in auto mode.
4.”+” and “-” touch
Use these touches to select the temperature or to adjust the timer. When pressing both buttons at the
same time you can switch between “C°” or “F°”.
30cm
30cm
50cm
control panel
handle
(both sides)
horizontal louver
blade
(swing automatically)
Caster
Panel
remote signal
receptor
power plug socket
power cord buckle
bottom tray
drain outlet
power cord outlet
drain outlet
(only for pump
heating mode)
upper air filter
(behind the grille)
upper air intake
air outlet
lower air filter
lower air intake
drain outlet
rear
front
5. MODE- touch
With this touch you can select the desired function. Every time when pressing this touch the function will
change : AUTO – COOL – DRY – FAN. The related indication light will turn on on the control panel.
or
max 120cm
min 30cm
on
off
AUTO function
When the air conditioning is in the “auto” mode, the air conditioning will automatically make a
selection between “cool” or “fan” function, depending on the room temperature and the selected
temperature.
The air conditioning will automatically stabelize the room temperature on the selected temperature.
When using the “auto” function, you can’t select the fan speed.
or
max 120cm
min 30cm
on
off
COOL function
The unit will cool with this setting.
Press the “mode” touch until the “cool” indication light turns on.
Use the arrow touches to select the desired room temperature.
Use the “fan” touch to select the desired air speed.
or
max 120cm
min 30cm
on
off
DRY function
This function is used to dehumidify the air.
Press the “mode” touch unit the “dry” indication light turns on.
With the selection you can’t select te temperature or fan speed.
Keep windows and doors closed for an optimal dehumidification.
It is not necessary to install the air outlet hose with this function.
Connect the drainage tube to the permanent drainage. See ‘Cleaning and maintenance > drainage’.
or
max 120cm
min 30cm
on
off
FAN function
This function allows you to use the unit as a fan.
Press the “mode” touch until the fan indication light will turn on.
Press the “fan” touch to select the air speed.
The temperature can’t be selected.
You don’t need to attach the air outlet hose.
30cm
30cm
50cm
control panel
handle
(both sides)
horizontal louver
blade
(swing automatically)
Caster
Panel
remote signal
receptor
power plug socket
power cord buckle
bottom tray
drain outlet
power cord outlet
drain outlet
(only for pump
heating mode)
upper air filter
(behind the grille)
upper air intake
air outlet
lower air filter
lower air intake
drain outlet
rear
front
6. TIMER touch
With this function you can select when the unit must turn on or off.
When the unit is on, you press the “timer” touch. The “timer off” indication light will turn on. This
indicates that the “auto shut off” is activated. When pressing het “timer” touch again, the “timer on”
indication light will turn on. This indicates that the “auto on” function is activated.
