54
DO1070DV
IT
· La classe climatica indica la temperatura ambiente minima a massima per un buon funzionamento
dell’apparecchio. La classe climatica è riportata nella targhetta sul retro dell’apparecchio.
· SN: Subnormale: temperatura ambiente da 10 °C a 32 °C
· N: Normale: temperatura ambiente da 16 °C a 32 °C
· ST: Subtropicale: temperatura ambiente da 16 °C a 38 °C
· T: Tropicale: temperatura ambiente da 16 °C a 43 °C
CAMBIARE IL SENSO DI APERTURA DELLO SPORTELLO
Lo sportello del congelatore è invertibile. Se si desidera mettere le cerniere dello sportello sull’altro lato,
consigliamo di far eseguire il lavoro da un tecnico specializzato. Prima di cambiare il senso di apertura
dello sportello, controllare che la spina sia staccata dalla presa di corrente e che il congelatore sia vuoto.
1.
Togliere le viti dietro al coperchio superiore.
Reverse Door
Tool required:
Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It
'
s
better
that
2
people
handle
the
unit
during
assembly
.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
2.
Staccare il coperchio superiore del congelatore.
Reverse Door
Tool required:
Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It
'
s
better
that
2
people
handle
the
unit
during
assembly
.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
3.
Togliere le viti e la cerniera superiore che tengono in sede lo sportello. Sollevare lo sportello e
appoggiarlo su una superficie morbida per evitare che si graffi.
Reverse Door
Tool required:
Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It
'
s
better
that
2
people
handle
the
unit
during
assembly
.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
Содержание Domo DO1070DV
Страница 78: ...78 DO1070DV SK...
Страница 79: ...79 DO1070DV www domo elektro be...
