Line Magnetic LM-845 PREMIUM, Руководство пользователя

Страница: 8 / 16

8
Rear panel
RCA input: Inputs (RCA plugs) are for connecting a «line level» source to your amplifier. It is designed to receive an
«analog» signal (as opposed to «digital» signal). To connect your source we are using a traditional «RCA» cable,
they are usually identified by a color code «RED» to the RIGHT channel and «WHITE» to the LEFT channel.
The right balanced connection: This connector is use to interconnect the Main Amplifier unit and Outputs unit with
the cable which is supplied with the amplifier.
Right output: Connect the speaker to the terminals marked RIGHT «+ R» and «R -» ensuring that «R +» is
connected to the «+» terminal of the enclosure and «R -» is connected to the terminal «-» the same enclosure.
Power Socket with main fuse: Main fuse is located on the rear of the amplifier just below the power cord socket.
Replace with the same type and value fuse.
Once all connections to the amplifier have been made, connect the power cable to an electrical outlet and turn on
the unit as it is ready for operation.
Left output: Connect the LEFT speaker to the terminals marked «L +» and «L -» by doing the same.
Important Note: Check the impedance of your speakers. When using a pair of speakers, you can use speakers
with an impedance of between 4, 8 and 16 ohms. BE SURE TO USE THE MATCHING TERMINALS.
The left balanced connection: This connector is use to interconnect the Main Amplifier unit and Outputs unit with the
cable which is supplied with the amplifier.
Note: Use cable included in the package to interconnect the Right and Left Main Amplifier unit (up) to Output
unit (down).
1
2
3
4
1 2 3 4 5 6 7 8 9 10 11 12 13 14
15
1 2 3 4 5 6
5
6
2 6