Line Magnetic LM-845 PREMIUM, Руководство пользователя

Страница: 3 / 16

1x LM-845 PREMIUM (2 boxes)
2x Fuses
1x Detachable power cord
1x Remote control
1x This user manual
1x Dedicated cable pair used to interconnect main amplifier unit to the output unit.
WARNING
Make sure that the device is not plugged into the mains before making any connections. It is also recommended to turn
off or disconnect all other devices associated while making connections to the product.
Keep all packing materials for future use and please fill in the warranty card for registration of warranty.
Please make sure that your local voltage is the same as indicated on the rearpanel. A too low or too high voltage can
cause serious damage to your amplifier. In case you find an improper voltage, please contact our company or your local
dealer.
Product features
- One thirty watts per channel, Class A Single ended Amplifier with 845 output power tubes, 12AX7, 310A and 300B input
tube are for three stages of signal amplification while 805 for the power amplification.
- Well selected and matched tubes. Tubes we chose are Shuguang 12AX7, Shuguang 12AU7, Electro Harmonix 6SN7
and Tung-sol KT150. No matter it is the Pre-stage or power stage of tubes we select and choose the best matching ones
to use on the same unit of amplifier to get the best sound quality out of it.
- Hand made construction with the finest point-to-point wiring.
- Soft Start and time-delay circuit. (30 seconds).
- Five pairs of Line inputs, One Pre-In, one balance and speaker terminals for 4, 8, 16 ohm speakers are located on the
back panel.
- RCA terminals are specially designed by Line Magnetic for the amplifier. It can reduce the signal loss during transition
and guarantee the sound quality.
- Hum balancer and user bias control has been used for hum and bias adjustment and one meter has been added to the
front plate to allow you to monitor bias with ease. Bias meter is not just a meter for monitoring the bias but also a power
level meter when switched to Meter by the selector on the top. It moves when music is on.
- Specially designed EI transformers made of Z11 Core for power supply and two Japanese Audio grade EI types
of output transformers with wide bandwidth are applied. All transformers and chokes are encapsulated and installed
separately on the amplifier to avoid and lower the disturbance between each other.
- Japanese ALPS volume potentiometer, American MIT and German Mcap coupling Capacitors etc. Audio grade of
components have been applied.
- Metal and removable tube guard cage.
- Infrared remote control.
3
Package content
FRANÇAIS
DEUTSCH
ESP
AÑO
L
IT
ALIANO
ENGLISH