- 8 -
restart your system.
4.3. Windows NT 4.0 Driver Installation
For New Windows NT 4.0 System (Fresh Installation)
1. Before installation, copy all the files under directory E:\SATA Raid_4Port\
Sil3114\ Win98_me _
2000_
xp_nt4.0\driver\ *.* to a blank floppy disk
2. After the SATA RAID PCI Host Adapter and attached drives are configured,
follow Microsoft procedures to install Windows accordingly.
3. At the
Windows Set-up
screen, press
F6
to specify and add the driver.
4. Press
S
, select
Other
, then press
Enter
.
5. Insert the Driver diskette and press
Enter
.
6. Select
Silicon Image SiI 3114 SATARaid Controller for Windows NT 4.0
and 2000
and press
Enter
.
7. Press
Enter
to continue and follow on-screen instructions to complete
Windows NT 4.0 installation.
Add Windows NT 4.0 Driver on Original Booting Device
1. After the
SATA RAID PCI Host Adapter
and attached drives are configured, boot
up Windows. Double click
My Computer/Control Panel/SCSI Adapters
, then click
the
Drivers
tab.
2. Click
Add…
then
Have Disk...
.
3. Insert the Driver CD in your CD-ROM/DVD drive and type in
E:\
(If your
CD-ROM/DVD is
E
:\), then click
Browse
.
4.Points specify a location, example
E
:\
SATA Raid_4Port\Sil3114\Win98_me
_
2000_
xp_nt4.0\Sl3114r.inf
, click
Open
then
OK
.
5. Highlight
Silicon Image Sil 3114 SATARaid Controller
and click
OK
.
6.If the
Insert Disk
dialog appears, click
OK
then
Browse.
7.Highlight
Sl3114r.sys
and
click
Open
then
OK
.
Verification of the Proper Installation for Windows NT 4.0
1. Double click
My Computer/Control Panel/SCSI Adapters
.
2. Highlight
Silicon Image Sil 3114 SATARaid Controller
and click
Properties
.
This device is working properly
is displayed in the dialog box,
the driver has been correctly installed.
4.4. Windows 2000 Driver Installation
For New Windows 2000 Systems (Fresh Installation)
1. Before installation, copy all the files under directory E:\SATA Raid_4Port\
