- 7 -
4.2. Windows ME Driver Installation
For New Windows ME Systems (Fresh Installation)
1. After the
SATA RAID PCI Host Adapter
and attached drives are configured,
follow Microsoft procedures to install Windows accordingly.
2. Once Windows has been installed, right click
My Computer
, then click
Properties
.
Click
Device Manager
tab.
3. Double click
Other Devices
then
PCI RAID Controller
.
4. Click
Driver
tab, then
Update Driver
.
5. Insert the Driver CD, check
Specify the location of the driver
(Advanced)
and click
Next
.
6. Select
Search for the better driver
option, check
Specify a location
,
uncheck
Removable Media
, type in
E:\
(If your CD-ROM/DVD is
E
:\), and
click
Browse
.
7. Points specify a location, example
E
:\
SATA Raid_4Port\Sil3114\Win98_me
_
2000_
xp_nt4.0
, click
OK
and then
Next.
8.Click
Next
and then
Finish
.
9. Remove the Driver diskette and click
Yes
to restart Windows to complete
driver installation.
For Existing Windows ME Systems
1. After the
SATA RAID PCI Host Adapter
and attached drives are configured,
boot up Windows.
2. At the
Add New Hardware Wizard
, check
Specify the location of the
driver (Advanced),
and click
Next
.
3. Insert the Driver CD, check
Specify a location,
uncheck the other boxes,
and click
Browse
.
4.Points specify a location, example
E
:\
SATA Raid_4Port\Sil3114\Win98_me
_
2000_
xp_nt4.0
, click
OK
and then
Next
.(If your CD-ROM/DVD is
E
:\)
5. Click
Next
and then
Finish
.
Verification of the Proper Installation for Windows 98/98SE/ME
1. Double click
My Computer/Control Panel/System
. Click
Device Manager
tab.
2. Double click
SCSI Controllers
,
Silicon Image Sil 3114 SATARaid
Controller
should be listed.
3. Highlight
Silicon Image Sil 3114 SATARaid Controller
and click
Properties
. A message
This device is working properly
is displayed in the
dialog box, the driver has been correctly installed. If any error message is
displayed, remove
Silicon Image Sil 3114 SATARaid Controller
and
