- 5 -
5.
Type in E:\ (If your CD-ROM/DVD is E:\) and then click
'Browse'
.
6.
Specify a location, e.g.
E
:
\SATA Express_2Port \Sil3132 \ WinXP_2000_2003_NT
,
and click
'OPEN'
then
'OK'
7.
When the wizard indicates that it has found a driver for the device, click
'Next'
8. If
the
'Hardware Installation'
dialog appears, click
'Continue Anyway'
9.
The wizard will now copy the required files to the system and start the driver. After
starting the driver, the wizard will display a completion dialog, click
'Finish'
to exit the
wizard.
2.4.Verifying the installation under Windows NT, Windows 2000/XP and
Windows Server 2003
For Windows 2000/XP
2.
Right click on the
'My Computer'
icon, select
'Properties'
, left click on the
'Hardware'
tab, and then on the
'Device Manager'
button.
3.
Double click on
'SCSI and RAID Controllers',
if there is no yellow '! ' or ' ? ' in front
of 'Silicon Image SiI 3132 SATALink Controller', the driver has started correctly.
4.
To view information about the devices attached to the controller, use the SiICfg Utility
and click on the device from the list.
For Windows NT 4.0
1.
Double click on the
‘My Computer'
icon, select
'Control Panel'
, click on the
'SCSI
Adapters'
icon.
'Silicon Image SiI 3132 SATALink Controller'
should be displayed
correctly under
'Device'
and
'Driver'
tab.
2.
To view information about the devices attached to the controller, use the SiICfg Utility
and click on the device from the list.
2.5. Updating the driver in Windows NT 4.0
1.
After the OS boots up, click
'Start'
2. Under
'Settings'
, click
'Control
Panel'
.
3. Select
'SCSI
Adapters'
from the Control Panel.
4. Select
the
'Drivers'
tab and click
'Add'
.
5. Click
'Have
Disk'
.
6.
Insert the Driver CD in your CD-ROM/DVD drive and press
'Enter'
.
7. Choose
'
E
:
\SATA Express_2Port \Sil3132 \ WinXP_2000_2003_NT
' and click
'OK'
.
8.
Refer to the instructions in section 2.4 to verify the controller was installed correctly.
