- 4 -
3. Press F6 for third party SCSI or driver installation at the beginning of text mode
installation. Press
'S'
when setup asks if you want to specify an additional device,
and insert the driver CD. Press
'Enter'
and select
'Silicon Image SiI 3132 SATALink
Controller'
.
4. Press
'Enter'
again, when prompted, to continue with text mode setup.
5. Follow the setup instructions to select your choice for partition and file system.
6. After setup examines your disks, it will copy files from the CD to the hard drive selected
above and restart the system. After restart, the setup process will resume to finish the
installation.
7. Once the operating system installation has completed you can follow the instructions
in section 2.4 to verify controller was installed correctly.
2.2. Adding the card to an existing Windows NT installation
1. Power off the system. Insert the SATA Card into an available PCI slot. Connect serial ATA
cable(s) between the SATA port and serial ATA device(s). Power up the system.
2. After the OS boots up, click
'Start'
3. Under
'Settings'
, click
'Control
Panel'
.
4. Select
'SCSI
Adapters'
from the Control Panel.
5. Select the
'Drivers'
tab and click
'Add'
.
6. Click
'Have
Disk'
.
7. Specify a location, e.g.
E
:
\SATA Express_2Port \Sil3132 \ WinXP_2000_2003_NT
,
and click
'OPEN'
then
'OK'
8. Choose
'Silicon Image SiI 3132 SATALink Controller'
and click
'OK'.
9. After the driver installation has completed you can follow the instructions in section
2.4 to verify the controller was installed correctly.
2.3. Adding the card to an existing Windows 2000/XP or Windows Server
2003 installation
1. Power off the system. Insert the SATA Card into an available PCI slot. Connect serial ATA
cable(s) between the SATA port and serial ATA device(s). Power up the system.
2. During OS boot up, W indows will display the
'Found New Hardware Wizard'
,
'Mass Storage controller'
.
3. Select
'Install from a list or specific location (Advanced)'
, and click
'Next'
, and
make sure the driver CD is in your CD-ROM/DVD drive.
4. Select
'Search for the best driver in these locations'
, and check
'Include this
location in the search:'
. Uncheck the other boxes.
