User Manual
English
Introduction
Thank you for purchasing the USB 3.1 Docking & Clone Station. This product has been designed to provide
trouble free, reliable operation. It benefits from both a LINDY 2
year warranty and free lifetime technical
support. To ensure correct use, please read this manual carefully and retain it for future reference.
Package Contents
•
USB 3.1 Gen 2 Docking & Clone Station
•
USB 3.1 Gen 2 Type C to A connection cable ~90cm
•
USB 3.1 Gen 2 Type C to C connection cable ~90cm
•
External Level VI power supply 12V 4A with ~1m DC cable with 5.5/2.5mm round connector
•
4 power cables (Euro/UK/US/AUS)
•
Foam pad (50x50x6mm) for 7mm HDDs
•
LINDY manual
Features
•
Connects two SATA HDD/SSDs to a computer using a single connector
•
Accepts 1.8/2.5/3.5” HDD/SSDs with 22 pin SATA combo interface. For Micro SATA please use LINDY
adapter No. 33502.
•
Offline clone function (OS independent) with button for cloning from slot A (source) to slot B (target)
•
USB 3.1 Gen 2 Sup Interface up to 10Gbps
•
SATA 6.0Gbps standard
•
Interfaces: USB Type C socket, DC 12V power socket
•
On/Off power switch
•
LEDs for power, slot A, slot B, clone process
•
Compatible with USB equipped computers
Installation & Use
•
Connect the power supply
•
If you want to clone HDDs, do not connect the Docking Station to your computer
•
For normal docking station operation connect the Docking Station to your computer via USB cable
•
Insert the HDDs in to the docking station and press the power switch to turn on
•
Wait until the drivers are loaded by the operating system – you should then see the drives in the file
manager program
•
HDDs may need to be partitioned / formatted using your operating system disk management utility
before you can access them.
•
Before unplugging HDDs make sure data transfer processes are completed
Using the Clone Function
•
Install the source and target HDDs into the appropriately labelled slot A (source) and B (target)
•
The target HDD must be of equal or larger capacity than the source HDD
•
Make sure that the target HDD is empty and not partitioned
•
When both drives are connected, press and hold the clone button for 3 seconds until the LED for
100% cloning is lit up. Then the button must be pressed again to start the clone process.
All 4 LEDs
(3) light up once the clone process has ended (percent status changes as clone progresses).
Do not switch off or unplug the HDDs during the cloning process!
Содержание 43231
Страница 2: ......
