User Manual
English
Installation
Please follow all instructions below. All diagrams are labelled with the
required fixings.
Pull out the main wall plate and remove the plastic covers.
Fixing display mount to a stud wall
Locate the studs behind the wall using a stud locator (not included).
Once located, position the display mount aligned with the studs. Use a
spirit level (not included) to ensure the mount is positioned correctly.
With a pencil (not included), mark clearly the location of the studs when
aligned with the holes of the display mount.
Once marked, drill 4 holes into the 4 markings of the studs (drill not
included). Suggested depths and drill bit size is here (Right). Re-
position the mount, aligned with the drilled holes and secure the mount
to the wall using the included screws and washers (W-A) and (W-C).
Wall plugs are not required for this mounting surface.
Please see the diagram here (Right) for further explanation.
Fixing display to brick wall
Position the display mount onto the wall where required. Use a
spirit level (not included) to ensure the mount is positioned
correctly. With a pencil (not included), mark clearly the location of
the drilling points when aligned with the holes of the display mount.
Once marked, drill 4 holes into the 4 markings of on the wall (drill
not included). Suggested depths and drill bit sizing is here (Right).
Re-position the mount, aligned with the drilled holes and secure
the mount to the wall using the included screws, washers and wall
plugs: (W-A), (W-C) and (W-B).
Please see the diagram here (Right) for further explanation.
Содержание 40973
Страница 2: ......