Lindy 38260, Руководство пользователя

Страница: 5 / 18

User Manual English
Rear Panel
LAN : Control the unit using TCP/IP Control.
RS-232-1 : Control the unit using RS-232 Control.
RS-232-2 : Reserved for future use
IR : Control the unit with the included IR extension cable and IR remote
Analogue Audio Input Ports 1-8 : These correspond with the Input HDMI port of the same number.
Embed analogue audio via a 3.5mm connection into HDMI.
Analogue Audio Output Ports 1-8 : These correspond with the Output HDMI port of the same number.
Extract analogue audio via a 3.5mm connection from HDMI.
IR Input / Output Ports 1-8 : These correspond with the Input HDMI to Output HDMI port of the same
number for control from the display side. If HDMI 1 is routed to Outputs 1 + 2, this will correspond with the
IR routing by IR Input 1 + 2 will be routed to IR Output 1. Please see below for a diagram:
Please note individual IR cables are not included with this unit. 3.5mm IR cables with the following pin out
can be used:
IR Extension: Connect with included IR Extension cable with control provided over the matrix from the
included IR remote
C13 Power: Connect with included AC Power cord.