Lindy 38054, Руководство пользователя

Страница: 5 / 7

Manual English
3
Notes on using DVI-D equipped devices: To connect devices equipped with DVI-
D connections, you can use either modular DVI/HDMI adapters or DVI/HDMI
adapter cables. Be aware that DVI-D is a ‘video only’ interface; audio signals are not
supported when using DVI-D source devices. Also, please note that DVI-D
equipped displays must support HDCP signal decoding to display HDCP protected
HDMI signals. HDCP compatible displays will normally feature the
HD Ready logo.
Remote Control
1. Power Button: Press to switch on the device and then press
it again to put the device in standby
2. Input Selection: Press any of the buttons 1 – 4 to select the
desired source
RS-232 Protocol - Pin definition
Baud Rate: 9600bps
Data bit: 8 bits
Parity: None
Stop bit: 1 bit
Flow control: None
Command
4x2 HDMI Switch Remote Control Console
PIN Definition
►
◄
PIN Definition
1 NC 1 NC
2 Tx 2 Rx
3 Rx 3 Tx
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
Command Action
POWER 00 Power Off (standby)
POWER 01 Power On
PORT 11 Output Select Input 1
PORT 12 Output Select Input 2
PORT 13 Output Select Input 3
PORT 14 Output Select Input 4
PORT 21 Output Select Input 1
PORT 22 Output Select Input 2
PORT 23 Output Select Input 3
PORT 24 Output Select Input 4