English
Manual
14
Factory Default Settings
The factory default settings are as follows:
Setting
Default
Display
Duration
Always On
Display Mode
The Port Number plus the Port Name
Scan Duration
3 Seconds
Security Functions
OSD Security
In order to prevent unauthorized access to the computers, the OSD provides a password
security feature. If a password has been set, the OSD will request that the user specifies it
before allowing entry.
Password:
To set a password:
1.
Highlight this item, then press [Enter].
The password may be up to 8 characters long, and can consist of any combination of
letters and numbers (A - Z, 0 - 9).
Key in the new password, then press [Enter].
Key in the new password again, in order to confirm that it is correct then press [Enter].
If the two entries match, the new password is accepted and the screen displays the
following message:
SET PASSWORD OK
If the entries do not match, the screen displays the message:
PASSWORD NOT MATCH
in which case you must start this procedure again.
Note: To modify or delete a previous password, access the Password function as in Step 1,
above, then use the backspace or delete key to erase the individual letters or numbers.
